Re: Forced 1080i in some DX11 games is causing screen flicker.
The only workaround so far is to use a monitor that doesn't use 1080p as resolution. For example a 21:9 Ultrawide or a 16:10 model.
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
i got similar results to you too with both limiters set to 110W and 255A my mobo is Z97X Gaming 5
View ArticleIntel Edison Arduino failed to upload
Dear All, I tried my first program in intel edison (blinking LED) from Arduino IDE in Ubuntu 14.04. This is failed due to timeout. I have checked my debug serial port and board selection in the IDE...
View ArticleI Am having problem in my raid 5 configuration
Dear All, I am having problem with my raid 5 hard disk, I have 1 500 GB operating System Hard Disk.and 5*2TB Data Hard Disk that is member of Raid 5.In My Client Site 4th hard disk was not working, in...
View ArticleRe: How best proceed with overheating i7-4790K?
sampark1980You said: " I got temperatures in mid 60Cs with a high of 71C with (stock cooler) ". May I ask you a few questions if you don't mind?1- What is the stress test type you have done to get that...
View ArticleYocto build error in nodejs do_install
Dear All, I tried my first build with Yocto and the build failed in nodejs do_install step. If restart the build process without doing any changes, the build success. Please find the attached logs....
View ArticleHello .. I am having problems in intel R Active Mnagment technology.
Hello .. I am having problems in intel R Active Mnagment technology. its showing yellow mark ..please try to solve the problem..
View ArticleRe: How best proceed with overheating i7-4790K?
I had same problems .i used this paste and now i have 77 c at turbo with h 60 watercooler.with stock paste i had 100c.take Prolimatech Thermalpaste PK-3 Nano 1,5gr .
View ArticleH97M-Plus mobo with I218-V nic trouble
Hi, For Study and home use I build a small computer with the following components:Mobo : Asus Intel 1150 H97M-PlusCPU : Intel Core i3-4150Ram : 2x Kingston HyperX 4GB DDR3 1600 (9-9-9) Blu 2KPSU :...
View ArticleRe: sketch upload fails: "transfer incomplete"
Edison is Linux based, all system operations are managed from command line. Tell me if you need the exact sequence.
View ArticleRe: Opencv on Edison
Hi rhinosticks2015 You can do the same on Edison, just install the pkgconfig package first with "opkg install pkgconfig".
View ArticleClik here to view.
Re: Intel Edison Arduino failed to upload
Himaybe it is the same issuesketch upload fails: "transfer incomplete"that your edison is running out of memroy by
View ArticleRe: Yocto build error in nodejs do_install
not sure but seems there is an issue with the hash sums of the tarball: SHASUMS.txt defines: "node-v0.10.28.tar.gz":"ef08a75f6359a16e672cae684e0804ca7f4554b7"howevernode-v0.10.28.tar.gz local sha1...
View ArticleRe: Crashlog_00001
yes, it does - have you modified the kernel or added any custom modules?
View ArticleRe: DE3815TYKH will not power down
hello, my last annotation is gone that the new update to the BIOS Version 36 does not work. But I will wait till the next update. greetings Peter
View ArticleRe: Intel Galileo - Can't upload sketch while boot from Big Linux Image
maybe try updating the firmware?
View ArticleRe: Bricked Board
you should see when connecting via serial. If you don't have anything showing up when powering up I'd call it bricked.
View ArticleRe: Intel Galileo IoT dev kit setup issues
have you selected the correct board within Arduino IDE? (-> Galileo Gen1)
View ArticleRe: Intel RST 13.2.4.1000 installation problem
I'm not able to generate such report because after succesfull installatin of RST I do not have an RST GUI there's no icon in a tray, no shortcut in a start menu and in "program files(x86)\intel\Intel...
View ArticleRe: Fail to suspend Edison board - Yocto image ww42
Hello, did you find anything? I only tried to shutdown the specific device via pci000:.... folder but it only makes the kernel to panic. Thanks Pierre
View Article