Re: Using Serialx on Edison
I have just been alerted that ttyUSB0 works "without a hitch". We now have GPS data dumped to the console. A good start. Next, bluetooth.
View ArticleClik here to view.
Re: Error during Kernel Compilation: make: *** No rule to make target...
The log is in my workshop which I don't have access to right now. I'm running Ubuntu 14.04 Trusty x86_64.
View ArticleTransfer Incomplete 2
Ok I am back to getting the transfer incomplete error. I must be doing something different, but I have no idea what.Edison on Arduino boardPowered and plugged into usb, com port 8. Thank you for your...
View ArticleRe: gpio-leds registration/devicetree
forced it to remux on boot in platform_hsu.c just look at the line with 128 in it. staticvoid hsu_port_enable(int port){ struct hsu_port_pin_cfg *info = hsu_port_gpio_mux + port; if...
View ArticleRe: NUC DN2820FYKH: WARNING: Processor thermal trip at boot
Hello lhill Are you guys still looking for more units to swap? Mine unit is saying that on random. If this is specific to this unit can it be upgraded to another type of nuc? My retailer wont replace...
View ArticleRe: Transfer Incomplete arduino+edison
Alpha I would love to hear what you find out. I am trying to eliminate Time.h from my project because It keeps causing so many bizarre problems. All I need to do is the following, Anyone know of a way...
View ArticleRe: Intel HD-series Contrast Problem... blooming / overly bright areas - How...
Where do I find the DX Diag reports? These are all laptops so there is an LCD screen on them... but I don't use them. I only connect to a Benq W1070 DLP projector. The AMD based lappy (3 years old)...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
Just to update: I received my RMA chip and ran Prime95 and OCCT and average temperatures running stock (4.0/4.4GHz) was in the mid 50C's with a maximum of 62C. This is down from 90C-100C on my previous...
View ArticleRe: OneWire/DS18B20 Sensors on Node.js/mraa for the Edison.
The current kernel misses the one wire modules (w1-gpio, w1-therm, wire). It should not be a big problem to patch these but somebody must do it. In latest kernel versions (not 3.10) i saw them...
View ArticleRe: Edison w/ Arduino Expansion board no longer boot with 12V supply
I have the same issue I think. I was using a 12VDC 800ma power supply connected to J1 to power the arduino board. After flashing I then disconnecting it for the first time. When I reconected the power...
View ArticleRobopeak and Windows image
Anyone able to install the LIBUSB drivers into the Windows image for the Intel Galileo in order to use the Robopeak USB display? I'm not able to install the drivers into the image before booting it up...
View ArticleClik here to view.
Re: Intel® Wireless-N 7260 - slows
dual band N7260 in my HP is working well with 17.13.0.9 drivers dated 09/29/2014 so far. no issues. i didn't change any options; U-APSD support etc. I have only connected to 2 different routers, both...
View ArticleRe: blink won't blink anything on Gen 2 board?
Hi Ivan, I'm guessing a bit here, but I have a feeling that you are not on the latest version of the IDE (the firmware update shouldn't try a downgrade). I would suggest to try out the latest version...
View ArticleRe: Intel Edison Camera Module
Hi Danny, If it was me, I'd start by looking at USB, and trying with a built in camera from a laptop. They are usually USB and tiny. It might be a bit tricky with drivers, but if you can manage to get...
View ArticleRe: Graphics problem.
Many thanks for this information, its as I thought, I have been sold a HD3000, advertised as a HD4000. The 4000 supports Directx11, higher than the other.
View ArticleIntel DZ68BC error code 00
DZ68BC bios ver 0039 not VGA (beep error vga on). Recovery bios corrupPower on 2digi led only 00... not test 13, 20, 51, E4, E6... How to fix?File *.BIO not flash. Need *.BIN or *.ROM to reflash it....
View ArticleRe: Edison and Arduino IDE connectivity issue
I have exactly the same issue. If I reinstall the IDE arduino-windows-1.0.4.7z, I can load a sketch, but can't load another one later.... OS is Win 7 64
View ArticleRe: DE3815TYKH will not power down
I have try openElec and slackware Linux installed to eMMC. The problem is we cannot shutdown / reboot the Linux O/S using normal procedure (including CTRL+ALT+DEL, shutdown command or reboot command)....
View ArticleClik here to view.
Mobile Intel 4 Series Express Chipset Family to 30 hz
how can i change 60 hertz to 30 hertz ? or where can i get a mod ? or how can create one ? i think this can help with overheating in my Mobile Intel 4 Series Express Chipset for games edit :PNP Generic...
View ArticleRe: blink won't blink anything on Gen 2 board?
Thank you flummer. We only loaded the software today, but somehow Google led us to a slightly out of date version. I was running 1.5.3 as you thought, and when I followed your link I was able to...
View Article