Re: Intel (R) Dual Band Wireless-N 7260 issue
Speed shown by netsh are the MAXIMUM speed if there are minimal error packets in the connection. The Atheros is working at maximum speed (no short GI) despite having 3 bars which indicates no issues....
View ArticleClik here to view.
DN2820FYKH Power up failing
Okay, I've built two full size machines in the past so I like to think I have enough background to diagnose that my N2820 NUC is a lemon. But just to be sure, I'm going to ask anyway. With a Crucial...
View ArticleRe: Low latency interrupts, Intel I210, Xeon E3-1200v3 series
Hi Andy_B, based on this thread - I/O AT is not supported by that processor. I/OAT and NetDMA on E3-1200v3 series Hope this help.
View ArticleRe: Intel® Wireless-N 7260 - slows
speculatrix wrote: if Intel could have fixed it in the driver or with updated firmware, they'd have done so. I got nowhere complaining to Intel customer support, they simply wanted me to try different...
View ArticleAfter trying all the steps for the Cannot Log in to CMM (cs-029107) and...
After trying all the steps for the Cannot Log in to CMM (cs-029107) and encountering the same issue, what is the next step? Would it be the Emergency CMM Firmware Recovery?
View ArticleRe: How best proceed with overheating i7-4790K?
Just received my replacement from Intel. Will let you know what the results are in a few days, I had no problems with RMA.
View ArticleRe: Galileo Debian v1.2 image
Hummm ... yeah Stuart it looked to me like it was trying to use the wrong modules too. Don't know how that situation could occur though. I even tried the experiment on a different target in a lab...
View Articlei notice that gcc is installed, allowing native development
But no "sudo" without an external package. I also notice that "mesg" is also not ported is there a thread where this is being discussed?
View Articlecannot use USB in Ubuntu 14.10 w/ Edision
I get the following messages on Ubuntu 14.10 . Any hints?looking like device 8086:e005 and 8087:0a99 [128973.236083] usb 1-1: new high-speed USB device number 4 using ehci-pci[128973.381206] usb 1-1:...
View ArticleRe: Intel AC7260 limited access after sleep
Lenovo tech support troubleshooted my N 7260 which consisted of making a few settings different on the adapter... such as increasing roaming aggressiveness to "5. Highest" and confirming the...
View ArticleClik here to view.
Re: Acer Aspire M-583P, Intel Wireless-N 7260. No bluetooth at all after...
Hey! I have spontaneous new behavior to report! So, tonight, I was sitting at my local coffee shop and started having Wifi troubles. I've been having them for some time now. In fact, the wifi sucks on...
View ArticleRe: How best proceed with overheating i7-4790K?
Juanvaldino, It looks like XTU has access to the settings for Turbo Boost Power Max, Turbo Boost Short Power Max, and Processor Current Limits. Try setting them to values in the screenshot. You may...
View ArticleRe: How to use/select physical sector size?
Hi Darkfall, Please check the email account you used when you registered for access to this forum. I have sent you a message that should resolve your issue.
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
My new cooler arrived (CoolerMaster Hyper 212X) it's not a supercooler but it made me get the temperatures down 23ºC. Idle with the stock cooler with undervoltage vcore:Idel with the new cooler (notice...
View ArticleRe: Cannot flash latest version of Yocto complete image
Hello Diego, Following the suggestion on a similar thread, Instead of using the default Archive.app, I extracted the contents of the archive file using the command line using: unzip -d /Volumes/Edison/...
View ArticleRe: How is the data storing for JBOD different from a Raid 0?
Thank you for the information David.The presentation is very clear. However I have another question after viewing the presentation Disk 1: 300GDisk 2: 300GDisk 3: 300GConfiguring JBOD: Total logical...
View ArticleRe: gpio-leds registration/devicetree
I think the first requirement is a proper device tree configuration and the second one is activation of the kernel modules which provide special led effects like heartbeat, mmc access, cpu load, etc....
View ArticleRe: Setting time zone and synchronizing time with time server on Edison
If you have no internet access but another Linux system in your local network is active the time can be simply copied f.e. in a bash environment using date -s "$(/usr/bin/ssh <remoteIP>...
View Article