Clik here to view.
Cannot use a monitor via displayport, can you help me please?
Hi, I'm an owner of Asus N550JK notebook. It's NVIDIA Optimus based, but I believe Displayport reside on Intel's side. None of my monitors won't work with Displayport of this laptop, other laptops...
View ArticleAre Remote BIOS Updates of an DN2820FYKH possible?
Hi Intel, I have a handful of DN2820FYKH IntelNUC's distributed around town, running Linux (Ubuntu 14.04) and I'd like to perform updates to their bios-- without visiting their physical location....
View ArticleRe: Firmware Edison IoT Edition
At the Hackathon anbody had told me that the URL are http://iotdk.intel.com/repos/1.1/iotdk and in the i586 are a file named Package but the File is empty and opkg told me that there are no updates and...
View ArticleRe: Intel RST single drive to RAID 0 pair
After you add it and then activate it does it stripe it then.
View ArticleAvoiding Processor Thermal Trip DN2820FYKH
I have a handful of DN2820FYKH IntelNUC's, and occasionally their (re)boot process is halted by the following prompt: "WARNING : Processor Thermal Trip". The thing is, the devices -- aren't actually...
View ArticleIntel Galileo Smart Cabinet
Hi, I would like to use a Galileo board, some sensors, some servos and a screen of some description to make a Smart Cabinet. So, what is a smart cabinet? Its a cabinet that recognizes the user. The...
View ArticleRe: Connecting USB or CSI camera to Edison Board.
Right. The main thing here is to get a webcam driver for your webcam and unfortunately right now the official image doesn't include any, thus that build with kernel reconfig in the thread...
View ArticleRe: IntelThermalTool - test your processor for overheating problem
Thanks for the information. Regards,
View ArticleRe: Intel® Iris™ and HD Graphics Driver update posted for Haswell and Broadwell
The past two graphics driver updates(10.18.10.3960 and 10.18.10.3907) for Intel 4400 graphics for Windows 8.1 64 bit do not seem to work properly with Microsoft Office 2013. When I have either of those...
View ArticleClik here to view.
Re: (Intel Smart Connect) Remote Wake Grayed Out
Please allow us more time to investigate.You are using Windows* 7, right?
View ArticleRe: Using Serialx on Edison
Thanks KurtE ; I was looking at a more straightforward way to do that; For instance, instead of copying over files at every modification (and then moving to the terminal tab of the Edison to compile)...
View ArticleRe: 7260 still drops connection with newest driver
Hi Kevin, thanks for you prompt response Attached the DXDiag reportCurrently I am using driver 17.12.0.4 OEM, before that I've used several versions of the 17 driver and 16.6, 16.10, all with various...
View ArticleRe: Support for the Adafruit 2.8" TFT display for Arduino Edison
Thanks, For the most part I think I have the display running fast enough for most things I want to do. My main reason for working with the Edison is because Trossen Robotics with Intel and others have...
View ArticleRe: Using Serialx on Edison
Straight foreword would be nice. I don't mind my process right now. I simply open winscp, browse to the directory with the stuff I am working on. I then double click on a file, which winscp copies...
View ArticleRe: Using Serialx on Edison
I guess I misunderstood your worflow - this seems straightforward to me I thought you had to do a command line scp * every time; thanks again!
View ArticleRe: Is there way to setup Arduino download to do it using wifi?
Thanks,So far what I have found is you can copy the sketch to /sketch/sketch.elfand then reboot the Edison. If I simply try to run the sketch directly from putty window, it appears to not run......
View ArticleClik here to view.
Re: Edison USB Pins
DP is on TP14DN is on TP16ID is on TP4 these testpoints are not marked, but TP14 and TP16 are right under the USB connector. TP16 is the one closer to the board edge. TP4 is the square pad located...
View Article