Re: Intel Matrix Storage RAID5 rebuild issue
PeterT, according to the information you provided on your post the problem started once you replace the 2nd hard drive (1TB). We had seen this behavior before and it was caused by a lack of power.It...
View ArticleRe: No USB power when D34010WYK is in Hibernate
Thanks for the information. I'm glad to know that you were able to find what was causing this issue. Could you please try the latest graphic driver version 15.33.14.64.3412 and let me know the results?...
View ArticleNUC - do I need to put memory in to see BIOS
Just bought a D54250WYK but haven't yet fitted memory or SSD. When I power it on I don't see any display on either the display port or HDMI. Is it DOA or do I need to put memory in to get as far as...
View ArticleRe: Supported memory not working and more trouble
I RMA'd it and got a new one back today (S/N G6YE3260025R), after 4 weeks! The new one does not have the thick thermal pad that presses on the SSD. I this a design change or has somebody on the...
View ArticleRe: NUC - do I need to put memory in to see BIOS
Hi TonyDenson, You will definitely need RAM installed for anything to be displayed. Like any PC the NUC requires RAM to boot. Thanks.Jason
View ArticleRe: Intel® Wireless-N 7260 - slows
The only way I found to solve the problem with Bluetooth + Wi-Fi was to lock my router on 5 GHz. Now my connection is locked at 300 mbps (max for my D-Link DIR 628) and no problem with Bluetooth mouse.
View ArticleRe: Firmware 024 Haswell Nuc - still the same problems
I made a Battery Cable reset now and my Powerbutton works again but i get a new Problem.Now i cannot start the Nuc with my IR Remote, after i boot it with Power Button, IR works well. Cant find any...
View ArticleRe: Hard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
It's a bit worrying that after four months of investigation has not yet been solved anything. I used my H.D. for that ye did desire to test and discovered the pattern of failure. Invested a lot of time...
View ArticleRe: Blinking problem on Intel Galileo
I read somewhere that it might be a problem if the COM is bigger than 10 (COM15 for example). I just wanted to accentuate that I made sure it was COM9 or less; in my case, COM2 (to be entirely...
View ArticleRe: Beta Intel® Iris™ and HD Graphics Beta Driver for Windows* 7/8/8.1 for...
@hass,,I just verified installation on a Surface Pro 2 with Windows 8.1. Here are the steps I used: 1. Login with administrator privileges2. Open Control Panel3. Open Device Manager4. Click on...
View ArticleRe: Sketch transfer incomplete need assistance
Hi bamacken, What COM port are you using? Does the COM port shown in Device manager match the selected port in the IDE?
View ArticleRe: Dual monitor installation on DH87MC
CWTL, You can connect and (simultaneously) use up to three monitors using the on-board graphics capability. If you have monitors that only support DVI, you can purchase a HDMI-to-DVI or...
View ArticleRe: DH87RL bugs: memory voltage / Turbo Boost options
I was able to get the Intel® Turbo Boost Technology box checked with an Intel® Core i3 processor. However, after saving the changes and restarting the option remains disabled. So, even though we can...
View ArticleRe: Bios not loading on DH87MC
@Diego_Intel..... I have purchased the desktop board Intel DH87MC on 3rd March 2014. I would like to ask for some help. I have accidentally disabled the onboard graphics and I don't have any graphics...
View ArticleRe: Intel Adv-N 6235 Wifi not connecting
I had just same problems using an Atheros card (ath5k). Problem seems to be that connman doesn't find wlan0 ...I disabled connman and configured wpa-supplicant and interfaces. This works ... but cannot...
View ArticleRe: Dual monitor installation on DH87MC
Thank you Scott, I believe that answers my question. My understanding is that I can connect two identical monitors, both having, for example, DVI cable connections, by connecting one to the DVI...
View ArticleI've compiled BSP 0.9, but I lost /dev/ttyGS0
Hello! I managed to get the latest BSP to compile with a linux-standard-base, per Sergei's instructions, and boot, which was a huge accomplishment for me! But, I'm running into trouble again. Back on...
View ArticleRe: Sketch transfer incomplete need assistance
Hey Intel_JEspinoza, the com port I've used over the past week varies. As of right now it's 8. I'm no longer having this issue. What it turned out to be was the firmware 0.7.5 reboot bug and I;m sure a...
View ArticleRe: "add a wireless display" missing in action
Thanks again. I will update the thread as soon as I get new information.Please stand by.
View Article