Clik here to view.
Re: (iot-devkit 1.1) When upload from Arduino IDE 1.5.3 (1.0.4) segfault in...
Hi CMata, Thank you for your reply! I am following the Getting Started Guide, I have screenshots of what I have set up and what happens. I am uploading a customized sketch for IoT Analytics. Here is...
View ArticleClik here to view.
Re: Unable to access detailed settings in BIOS (Performance tab)
Thanks for that Allan. Do you have an ETA regarding this though? Looking through that thread linked, the problem seems to have been around since 0028 and that's been quite a few months.
View ArticleUnable to Load Wireless-N 7260 Bluetooth Driver
Have been unable to successfully load the Intel driver. I've tried a number of installation packages (probably all from the last year) and they complete successfully but when you go into Device...
View ArticleRe: MRAA not working/ Sys gpio does
if you're at ces i just posted another discussion to see if there was momentum for people to get together, makers and intel
View ArticleClik here to view.
Re: Webcam throwing distorted Images
CMata_Intel, it looks like most of he picture is there, a possible not ordering of the data after it has arrived out of order? holY_Ghost, The image has to be coming in with a sequence indicator and...
View ArticleRe: If there is no Edison labeled disk driver mounted in Windows Computer...
OK, I see. I will try again to see if I can access the Edison through serial connection. Thank you
View ArticleClik here to view.
Intel HD Graphics Driver update changes screen resolution.
Hello, I was wondering if anyone could help/had a solution for a problem I am having. I tried searching to see if anyone else had the same issue or tried anything different from what I've tried and...
View ArticleRe: First day ok with 13V. Second day short circuit
My suggestion for troubleshooting: make sure the lab supply is set for high enough current limit. It could be that the Edison draws too much current at startup, so the lab supply voltage sags. this...
View ArticleServo trouble
I have a fun robot project pretty much wrapped. The last thing to do is work out this bug running multiple servos. I have six HiTec HS-311 servos powered externally. My circuit is definitely good. It...
View ArticleRe: Intel 4400 hd idling issues.
That thread has no solutions. What am I supposed to do with that?
View ArticleClik here to view.
Re: What is the best i5 processor (apu) for gaming. What processor (apu) can...
would you be able to post a link to live Toshiba support
View ArticleNUC D34010WYK Display issues
Hello, On the 7th of November I have bought an Intel nuc d34010wykh. I have had some display issues that recently have grown worse. My current setup is as follows:NUC connected to TV with mini hdmi to...
View ArticleIntel HD Graphics - Installed in Device Manager,but shows as in advanced...
Windows 7 Professional 64 bitPower management also unavailable. HP Elitebook 840 G1 - This model does NOT have a separate video cardHave tried 6 different versions of HD Graphics downloaded from...
View ArticleIntel HD GRAPHICS CONTROL PANEL SERVICE会造成语言栏的不正常显示。
发现一个问题，Intel HD GRAPHICS CONTROL PANEL SERVICE会造成win7语言栏的不正常显示。本来语言中只有简体中文，却在语言栏多出个CH、EN选项，经过不断观测，排除，确定是这个服务的问题，关掉这个服务就没问题了！
View ArticleRe: Can’t enter the bios via F2 during boot
I have done some several more checks:1. I have checked that BIOS jumper is set to normal mode2. I pushed the power button and hold it down until I heard three short beeps, I then received the Power...
View ArticleRe: Intel Edison simply refuses any USB except serial Putty.
I forgot to mention, that with the mini breakout board, I have found that there are some limitations on USB host mode, in particular if you do something like a soft reboot with USB devices attached,...
View ArticleDN2820FYK no signal randomly
Dear support, I've been having trouble with my nuc in that the signal will randomly cut out. Sometimes there's no sound or it crackles. My TV works fine with all other hdmi devices and this problem...
View Article