Re: s2600cp4 server board make loud noise for cpu fan. I am using other...
I noticed you mentioned that you chose “Other Chassis” for the FRUSDR selections. Do you actually have a non-Intel chassis? If so, you need to make sure you program each header properly. For instance...
View ArticleClik here to view.
Intel® HD Graphics 4000. The new driver is: 15.33.29.64.3945. Can't find it.
The Intel® Driver Update Utility check shows me three newer drivers, one of them for Intel® HD Graphics 4000. The new driver is: 15.33.29.64.3945. Pushing the "download now" button shows "either been...
View ArticleNUC USB problems
We have three DCCP847DYE NUCs, running our own software package we get comms failures. We updated the BIOS to the latest version and they became SYE NUCs (interesting?!), but we still get comms...
View ArticleRe: Intel galileo video capturing and saving using webcam using opencv
Hello All, I have tried doing everything mentioned above but still I get same error while trying to capture video frame using my Logitech 270 Webcam and io-dev-kit image. Can anyone please help? Thanks...
View ArticleClik here to view.
Re: w2600cr corrupted bios update - recovery options?
Did you rename the “Rec.cap” file or updated the BIOS.nsh file? Remember that we need to edit the .cap file to match what the BIOS.nsh is trying to execute or you can open the BIOS.nsh and update the...
View ArticleRe: Support for the Adafruit 2.8" TFT display for Arduino Edison
Yes I saw that too, but so far I have not noticed any speeding up. I have not tried the Arduino version much since then, but mostly the Linux MRAA version which goes directly to the spidev device. thanks
View ArticleProblem with serial port on the edison mini breakout board
I've been trying to use the Edison mini breakout board to communicate with my GPS module through the serial port (UART). My GPS module use RX/TX only and does not support RTS/CTS. When I use the...
View ArticleRe: NUC 3815 Linux watchdog timer
Thanks for the information. I would recommend checking with the Linux community for peer assistance at Open Source and Linux Forums Allan.
View ArticleRe: youtube flash hardware rendering
Hi Let_go, What is the model of the system you are using? BTW, great video, very funny. ThanksRobert
View ArticleRe: udp.parsePacket issues
There is a new software release v1.0.4 for the Galileo board https://communities.intel.com/docs/DOC-23388 , you have to download the IDE of this version and upgrade the firmware version you have so...
View ArticleRe: Intel AC7260 limited access after sleep
This is my first post and I have the Intel-N 7260 card in my Lenovo Flex 15 (Win 8.1 64 bit, 8 GB RAM, i5-4200U). A little horrified to see all the time and energy on this issue with no apparent...
View ArticleClik here to view.
Re: s5000sva, web console, can't find server, Small Business Server 2008
In this particular case, you should be able to install your Operating System in your 80GB drive. This way, you would need to configure your 80GB disk as a standalone RAID 0 drive for your Operating...
View ArticleClik here to view.
Re: Using The SPI Port Without the mraa Library Problems
I gave that code a run and I too see that there is only one byte being chucked out. ( In my pic I have MOSI and MISO in a loop for fun(?))Whilst on the Raspberry Pi, it does indeed work fine This...
View ArticleRe: Problem with Pocket Pc
Hi Swigert, I apologize for the delay in my response, I think I understand now. Currently the Bluetooth is a little limited, but in the new software release we will have some more Bluetooth features...
View ArticleRe: digitalWrite and MRAA digitalWrite
My guess is maybe the signals are floating with no load... I may try again with same program and turn on try to trace the analog values of these pins. Could also try with older Logic 16 to see if any...
View ArticleHow to reset MFSYS25 switches to factory defaults?
Is there a method to reset the switches inside of an MFSYS25 back to factory defaults such that all customized settings are cleared out? Thanks!
View ArticleClik here to view.
Re: digitalWrite and MRAA digitalWrite
For the fun of it I did a quick Logic capture, this time also capturing the Analog values on pins 13 and 12 as you can see below:As you can pin 12 is floating along in a range of about .86 and 1.32...
View ArticleRe: Using The SPI Port Without the mraa Library Problems
Thanks for taking the time to check into it.
View ArticleRe: UVC Driver Support
Hi Vinay, I'm new comer.I already succeed adding alsa to kernel. It works.But I cannot add uvc.At menuconfig, nothing in "Medai USB Adapters[*]". Device Drivers Multimedia...
View Articleintel edison dowmload flahs by boot
hello everyone, 1. My edison mount partition 's file change only read .How to solute the question? 2. How to download by edison's boot ?
View Article